(see application manual “How to assemble Cree Components”)Īs an Architect/ Planner, you can use BIMobject and the Cree System to create a preliminary design for a tender competition or the building approval process. Gable-Beam made of reinforced concrete (Concrete: C30 / 37 120kg Reinforcement per 1m³ concrete).ĭimensions: 2-field (2x Grid) 3-field (3x Grid) It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations. It also has spacers on the transverse wires which permit the control of the bed joint thickness. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |